SGC 420 MkII Firmware

You’re about to download SGC 420 MkII Firmware

You have chosen to download our software.

Within a few seconds, you will receive an email containing a download link.

Having trouble using the software? Please contact support@deif.com. 

Best regards, 

DEIF A/S

The software is subject to copyright DEIF A/S
By following the above mentioned link and downloading the file you automatically accept DEIF A/S copyright and license agreement (EULA). The license agreement can be found on www.deif.com/software

This software applies to the following DEIF products:

You’re about to download 16.00

The main changes implemented since the last version are as follows:

New Features

• EIC : Added support of Generic CPCB4+.
• EIC : Added support of Perkins CPCB4+.
• EIC : Added support of Scania EMS2 S6.
• EIC : Added support of Baudouin Gas.
• EIC : Updated SPN description database.
• Added Digital Input functions in M-logic Commands.
• Updated Custom Sensor Range Change to -3000 to 3000
• X (resistance, mA / V) Value in Live data view.
• Added DTC over MODBUS.
• Added Shutdown as fail Class in Maintenance Alarm.

 

Changes

• Run Hour Time available in both hours & minutes.

 

Corrections

• Fixed issue when "Auto Restore Inhibit" & "Mains Load Inhibit" are configured together.

Ver. Date Description

16.00

27/06/2024

New Features

• EIC : Added support of Generic CPCB4+.
• EIC : Added support of Perkins CPCB4+.
• EIC : Added support of Scania EMS2 S6.
• EIC : Added support of Baudouin Gas.
• EIC : Updated SPN description database.
• Added Digital Input functions in M-logic Commands.
• Updated Custom Sensor Range Change to -3000 to 3000
• X (resistance, mA / V) Value in Live data view.
• Added DTC over MODBUS.
• Added Shutdown as fail Class in Maintenance Alarm.

 

Changes

• Run Hour Time available in both hours & minutes.

 

Corrections

• Fixed issue when "Auto Restore Inhibit" & "Mains Load Inhibit" are configured together.

R15.00

28/02/2024

SGC 420 Mk ll offline firmware.

New feature:

• Added these EIC protocols:
• PSI
• Isuzu
• Kohler
• JCB
• JCB 430/448 Stage V
• MAN
• Yuchai
• FPT Stage V
• Perkins Stage V
• Perkins Stage V 1204J
• Cummins KTA19
• Jichai JC15D Weifu
• Jichai WYS
• Jichai JC190
• Jichai JC15T JG
• Deutz EMR 5 Stage V
• Doosan Stage V
• Cummins CM2850
• Weichai e6gas
• Caterpillar ADEM 6
• Yanmar Stage V
• Volvo Stage V
• Volvo Penta EMS2
• MTU J1939
• Iveco Stage V
• Jing guan
• Deutz EMR 4
• Doosan G2 EDC17
• FPT EDC17
• Hatz EDC17
• MAN EDC17
• Perkins EDC17C49
• SDEC
• Steyr EDC17
• Xichai Gas
• YANMAR EDC17
• Yuchai YC-BCR
• Angle
• Baudouin Wise15
• Iveco CURSOR
• Iveco EDC7
• Iveco NEF
• Iveco Vector8
• Cummins CM2350
• Cummins CM2880
• Cummins CM2358
• DDEC III
• DDEC IV
• Deutz EMR 2
• Deutz EMR 3
• Deutz EMR 5
• Doosan MD1
• Kubota stage V
• MAN EMC Step 2.0
• MAN EMC Step 2.5
• MTU ECU8
• MTU ECU9
• Caterpillar ADEM 3
• Caterpillar ADEM 4
• Caterpillar ADEM Generic
• Perkins ADEM 3
• Perkins Generic
• Perkins StV 1200
• Perkins StV 400
• Volvo Penta EDC 3 (1500)
• Volvo Penta EDC 4 (1500)
• Volvo Penta EDC 3 (1800)
• Volvo Penta EDC 4 (1800)
• Volvo Penta EMS 2.3
• Volvo Penta EMS 2.4
• Weichai Gas
• Baudouin Wise10B
• Weichai Wise10B
• Weichai Wise15
• Yuchai diesel
• Yuchai gas
• VE E483/E694 CPCB IV

 

Changes:

• Fixed issue with mains timer.

R14.07

11/12/2023

SGC 420 Mk ll offline firmware initial release. R12.00 was the initial release for the SGC Mk ll variants. All previous releases were over smart flash.

New feature:

• Added EIC - DDDEC protocol.
• Added EIC - John Deere protocol.
• Added EIC - John Deere Stage V Protocol.
• Added EIC - Scania S8 protocol.
• Added EIC - Kohler KDI3404 protocol.
• Added EIC - Bosch EDC17CV54 protocol.
• Added auto start and stop inhibit inputs.
• Added short to battery to sensors 3 and 4.
• Implemented Quick Flash (without config mode) for M-Logic.

 

Changes:

• Updated start sequence to avoid breaker closure before safety monitoring expires.
• Removed the status screen lock during the start and stop sequences.
• Removed duplicated strings from display language pack.
• Removed duplicated strings from language pack.

On this page, you can download software updates for your product(s) and help yourself to various utility tools and add-ons that will assist you in setting up, detecting faults and configuring your product(s).

Please be advised that not all of our products can be updated by the user. Nor do all of our products come with a utility tool. Consequently, the list on this page cannot be considered an overview of our product programme.

DEIF will register your download along with the used e-mail address for the purpose of sending out information on future updates, if requested.

DEIF cannot be made responsible for any consequences of failed product updates or use of utility tools. Nor can DEIF A/S be made responsible for consequences of changes in behaviour of products due to a software upgrade. It is always the responsibility of the user to ensure correct set-up and configuration before commissioning. Please study the version log of the software before updating the product.

Licence agreement for software downloaded from www.deif.com

Downloaded software remains the property of DEIF. The software may not be distributed for commercial purposes, changed or reused in full or in part or sold to any third parties.

The latest versions for full functionality

As always, we recommend that you install our offered improvements to fully utilise your DEIF product.

All improved software can be downloaded at your convenience at www.deif.com under “Software”.

Should you have any questions or experience problems finding the relevant software for your product, please feel free to call DEIF A/S at +45 96149614 or your relevant local DEIF office. Alternatively, we are always ready to assist you, if you send an e-mail to support@deif.com.