PPM 300 Hybrid controller https://www.deif.com/products/controllers/advanced-paralleling-and-power-management-controllers/ppm-300-hybrid-controller/ en Fri, 17 Jul 2026 05:45:12 GMT NotRecommendedForNewDesigns 202872cc-f67e-4ba7-8f51-d17840cf0d3a Customisable hybrid controller with extensive power management features

]]> The PPM 300 Hybrid controller controls an inverter with a power source, and the inverter breaker.

A DEIF power management system can include several Hybrid controllers which then work together to ensure effective power management. This includes Power Take In (PTI) and Power Take Off (PTO) modes, running on inverter with a power source only if needed and available, asymmetric load sharing with configurable constant discharge, and genset start if required.

Each Hybrid controller can control up to four heavy consumers and connect up to three non-essential load groups.

Part of the versatile PPM 300 range

The PPM 300 Hybrid controller is part of the DEIF PPM 300 range of versatile controllers with built-in multi-master power management features. The range offers variants designed for a wide range of marine and offshore applications –from generator control and protection to engineered power management solutions developed for generators, battery energy storage, shore connections, and bus tie breakers. For general information about the PPM 300 range, see the PPM 300 main page.

Highly customisable architecture

All PPM 300 variants can be specified with 4 or 7 I/O module slots. The modules provide voltage and current measurement, I/O, engine control, governor and AVR functions, and communication. Three modules are mandatory, but you can use the remaining 1 or 4 slots to customise the controller by adding modules or leave them empty. In addition, you can add up to 9 expansion racks to a single PPM 300 to get up to 58 free module slots (up to 4 in the base rack and up to 6 in each expansion rack).

Unique ANSI 87G differential protection

With the optional ACM3.2 module, you can add ANSI 87G differential protection for generators. The module measures phase currents on the consumer and neutral sides of a generator in order to detect phase-to-phase faults or phase-to-earth faults in earthed generator systems. With this unique feature, you can design reliable and safe power systems without external differential protection devices.

For a full list of modules, see the Modules tab.

Recommended I/O modules

Slot 1

Slot 2

Slot 3

Slot 4

Slot 5

Slot 6

Slot 7

PSM3.1

ACM3.1

IOM3.1

EIM3.1

GAM3.1

IOM3.1

PCM3.1

The table shows a 7-slot rack, but the controller is also available with a 4-slot rack. Modules PSM3.1, ACM3.1, and PCM3.1 are mandatory. If you add expansion module racks, each expansion rack must contain a PSM3.2 power supply module but does not need to contain other modules.

Other PPM 300 variants

Genset controller

Emergency genset controller

Shaft generator controller

Shore connection controller

Bus tie breaker controller

]]> GAM3.1 eedcbb74-92d0-48ea-a2fb-bc5fe1cc6baf https://www.deif.com/products/modules/governor-and-avr/gam31/ module This governor and AVR module has four relay outputs, two analogue outputs and a pulse width modulation output, and two analogue inputs.

]]> This governor and AVR module has four relay outputs, two analogue outputs and a pulse width modulation output, and two analogue inputs. These I/Os are configurable. GAM3.1 also has terminals for analogue load sharing (future use).

]]> Physical connections
  • 4 x Relay output—configurable
    • 30 V DC, and 6 A
  • 1 x Active power (P) (kW) load sharing (future use)
    • -5 to 5 V DC
  • 1 x Reactive power (Q) (kVAR) load sharing (future use) 
    • -5 to 5 V DC
  • 2 x Analogue current or voltage output (analogue current or voltage output)—Active outputs
    • -20 to 20 mA, or 0 to 20 mA, or 4 to 20 mA, or any custom range between -25 and 25 mA
    • Voltage output (DC)-10 to 10 V, 0 to 10 V, 0 to 5 V, -5 to 5 V, 0 to 3 V, -3 to 3 V, or 0 to 1 V, or any custom range between -10 and 10 V
  • 1 x Pulse width modulation (PWM) output
    • 500 Hz ±50 Hz
    • Voltage: Low level: < 0.5 V. High level: > 5.5 V. Maximum: 6.85 V.
  • 2 x Analogue current or voltage input configurable (galvanically connected)
    • From active transmitter: 0 to 20 mA, 4 to 20 mA, or any custom range between 0 and 24 mA
    • Voltage inputs (DC) -10 to 10 V, 0 to 10 V, or any custom range between -10 and 10 V
]]> GAM3.2 36eaf14f-a8d5-43d9-ba36-2388c74bf035 https://www.deif.com/products/modules/governor-and-avr/gam32/ module This governor and AVR module has its own power supply, two analogue outputs and a pulse width modulation output, five digital inputs, a status relay output, and four relay outputs

]]> This governor and AVR module has its own power supply, two analogue outputs and a pulse width modulation output, five digital inputs, a status relay output, and four relay outputs. Apart from the status relay, all these I/Os are configurable. GAM3.2 has its own microprocessor. If the rack power supply fails, GAM3.2 can continue to be used for manual operation if it has its own, independent power supply. The power supply terminals include circuit protection against load dump transients and JEM177 surge transients (rugged design). These terminals also include battery voltage measurement.

]]> Physical Connections
  • Supply
    • 12 or 24V DC Power supply and frame ground
  • 2 x Analogue current or voltage output 
    • Active—GOV/AVR/configurable
    • Current output: any custom range between -25 and 25 mA
    • Voltage output (DC)-10 to 10 V
  • 1 x Pulse width modulation (PWM) output
    • 500 Hz ±50 Hz
    • Voltage: Low level: < 0.5 V. High level: > 5.5 V. Maximum: 6.85 V.
  • 5 x Digital inputs—configurable (Bipolar)
    • ON: -36 to -8 V DC, and 8 to 36 V DC
    • OFF: -2 to 2 V DC
    • Voltage withstand: ±36 V DC
  • 1 x Relay output—GAM3.2 status
    • Solid State
    • 30 V DC and 1 A
  • 4 x Relay outputs—configurable
    • 30 V DC, and 6 A

Supply voltage low alarm

  • This default alarm is for auxiliary power supply voltage protection.
  • The alarm is based on the power supply voltage measured by the GAM. The alarm is activated when the power supply voltage is less than the setpoint for the delay time.

Supply voltage high alarm

  • This default alarm is for auxiliary power supply voltage protection.
  • The alarm is based on the power supply voltage measured by the GAM. The alarm is activated when the power supply voltage exceeds the set point for the delay time.
]]> IOM3.1 40ba01dd-7c89-41f1-bbaa-25d199d19049 https://www.deif.com/products/modules/input-output/iom31/ module The input/output module has four changeover relay outputs and 10 digital inputs. These I/Os are all configurable.

]]> The input/output module has four changeover relay outputs and 10 digital inputs. These I/Os are all configurable.

]]> Physical connections
  • 4 x Relay outputs—configurable
    • 250 V AC or 30 V DC, and 6 A
  • 10 x Digital inputs—configurable (Bipolar)
    • ON: -36 to -8 V DC, and 8 to 36 V DC
    • OFF: -2 to 2 V DC
    • Voltage withstand: ±36 V DC
]]> IOM3.2 fe268532-2a3d-4c2b-97af-c042e93af80a https://www.deif.com/products/modules/input-output/iom32/ module The input output module has four relay outputs, four analogue multifunctional outputs (including two pulse width modulation PWM outputs), four digital inputs, and four analogue multifunctional inputs. These I/Os are all configurable.

]]>
  • 4 x Solidstate relay outputs – configurable (30 V DC, 6 A, resistive)
  • 2 x Analogue multifunctional output (mA, V DC, PWM)
  • 2 x Analogue multifunctional output (mA, V DC)
  • 4 x Digital input
    ON: -36 to -8 V DC, and 8 to 36 V DC
    OFF: -2 to 2 V DC
    Voltage withstand: ±36 V DC
  • 4 x Analogue multifunctional input (mA, V DC, Resistor (RMI))
    • ]]>         IOM3.3 a27e0648-d4ab-4a40-bca3-7101b723acde https://www.deif.com/products/modules/input-output/iom33/ module The input output module has ten analogue multifunctional inputs. These I/Os are all configurable.

    ]]>
  • 10 x multifunctional inputs, freely selectable as:
  • Digital input with wire break
  • 0(4)…20 mA
  • ±10V DC/ 0…10V DC
  • Resistor input (RMI), 1, 2- or 3-wire
  • Pt100
  • Pt1000
  • Thermocouple, type E, J, K, N, R, S, T selectable    

    • For all inputs: Voltage withstand ±36V DC     

    ]]>         IOM3.4 6913261d-e0c5-4fae-80b3-45b8a7a4b880 https://www.deif.com/products/modules/input-output/iom34/ module The input/output module has 12 transistor outputs and 16 digital inputs. These I/Os are all configurable.

    ]]>     The input/output module has 12 transistor outputs and 16 digital inputs. These I/Os are all configurable.

    The controller can use transistor outputs for many purposes. Examples: Activate alarm devices, open and close breakers, and genset speed and voltage regulation.

    ]]>     Physical connections
    • Supply
      • Positive supply for transistor terminals (12 or 24 V DC)
    • 12 x transistor outputs (Configurable)
      • PNP—Transistor output (< 55 °C: 250 mA; > 55 °C: 200 mA)
    • 16 x digital inputs. (Configurable)
      • ON: -36 to -8 V DC, and 8 to 36 V DC
      • OFF: -2 to 2 V DC
      • Voltage withstand: ±36 V DC

    Transistor output characteristics and configuration

    • All transistor outputs are configurable. You can assign a digital output function, or configure one alarm, for a transistor output. You can program customized transistor output functions using CustomLogic (PICUS software). You can also create customized digital output functions using CustomLogic, and assign a transistor output.
    • The transistor hardware itself is normally open. The transistor output state (whether it is open or closed) depends on the configuration in software and the function (or alarm) state. 

    Digital input characteristics

    • IOM3.4 has two independent groups of digital inputs with separate common terminals.
    ]]>         PSM3.2 983ba502-eda5-4099-a679-8c4da578d983 https://www.deif.com/products/modules/power/psm32/ module A PSM 3.2 power supply module is installed in each extension rack to provide power to all the hardware modules in the extension rack.

    ]]>     A PSM 3.2 power supply module is installed in each extension rack to provide power to all the hardware modules in the extension rack. It communicates with the primary controller rack and other extension racks through the use of the dedicated DEIF internal communication ports.

    The extension rack status and alarms activate the PSM's three relay outputs. There are two ports for internal communication with the main controller. PSM3.2 manages the hardware module self-checks for the rack and includes a power LED. The power supply terminals include circuit protection against load dump transients and JEM177 surge transients (rugged design). These terminals also include battery voltage measurement.

    ]]>     Physical connections
    • Supply
      • 12 or 24V DC Power supply and frame ground
    • 3 x Relays outputs 
      • 30V DC, 1A
      • 1 × Status OK (fixed), and 2 × configurable
    • 2 x RJ45 
      • DEIF internal communications ports 

    Protection

    • The power supply inputs are internally protected by a 12 A fuse (not replaceable) (fuse size determined by load dump requirements).

    Supply voltage low alarm

    • The alarm is activated when the power supply voltage is less than the setpoint for the delay time.

    Supply voltage high alarm

    • The alarm is activated when the power supply voltage exceeds the set point for the delay time.

    Power supply voltage as an analogue output

    • You can configure an analogue output with a function for the power supply voltage. The controller then adjusts the analogue output to reflect the operating value.
    ]]>         PSM3.1 7d76ae16-9f70-4efa-84fa-408fd80f94d1 https://www.deif.com/products/modules/power/psm31/ module The PSM3.1 power supply module provides power to all the hardware modules in the primary controller rack containing the main controller.

    ]]>     The PSM3.1 power supply module provides power to all the hardware modules in the primary controller rack containing the main controller. The module communicates with extension racks through use of the dedicated DEIF internal communication ports. 

    The primary controller rack status and alarms activate the PSM's three relay outputs. There are two ports for internal communication with I/O extension units. PSM3.1 manages the hardware module self-checks for the rack and includes a power LED. The power supply terminals include circuit protection against load dump transients and JEM177 surge transients (rugged design). These terminals also include battery voltage measurement.

    ]]>     Physical connections
    • Supply
      • 12 or 24V DC Power supply and frame ground
    • 3 x Relays outputs 
      • 30V DC, 1A
      • 1 × Status OK (fixed), and 2 × configurable
    • 2 x RJ45 
      • DEIF internal communications ports 

    Protection

    • The power supply inputs are internally protected by a 12 A fuse (not replaceable) (fuse size determined by load dump requirements).

    Supply voltage low alarm

    • The alarm is activated when the power supply voltage is less than the setpoint for the delay time.

    Supply voltage high alarm

    • The alarm is activated when the power supply voltage exceeds the set point for the delay time.

    Power supply voltage as an analogue output

    • You can configure an analogue output with a function for the power supply voltage. The controller then adjusts the analogue output to reflect the operating value.
    ]]>         PCM3.1 9e133125-ecd6-4d4e-bde3-241993cd91a1 https://www.deif.com/products/modules/processor-and-communication/pcm31/ module Housed in the primary controller rack, the processor and communication module contains the controller's main microprocessor, which runs the controller application software.

    ]]>     Housed in the primary controller rack, the processor and communication module contains the controller's main microprocessor, which runs the controller application software. It includes the Ethernet switch to manage the controller Ethernet connections, with five 100BASE-TX Ethernet connections. It has a Self-check OK LED. It also has two sets of CAN bus terminals and houses the SD card. The PCM3.1 performs time synchronization with an NTP server.

    ]]>     Physical connections
    • 5 x 100BASE-TX Ethernet
      • Service PC
      • Display unit
      • Configurable
        • DEIF network
        • SCADA
        • Alarm Monitoring System
        • Modbus TCP/IP
    • 2 x CAN bus
    • 1 x SD Card*

    Controller temperature too high

    • This is a built-in alarm for the controller internal temperature, as measured on PCM3.1

    PCM3.1 clock battery

    • PCM3.1 includes an internal battery for timekeeping during a power supply failure. If there is no power supplied to the controller or the PCM module, the controller uses the battery power for its internal clock.
    • The PCM clock battery failure alarm is activated when the battery in PCM3.1 needs to be replaced

    *Note: To meet the temperature and EMC specifications, you must use an industrial grade SD card

    ]]>         ACM3.2 0c81b3cd-00c7-4b74-9429-2bc10c289284 https://www.deif.com/products/modules/alternating-current/acm32/ module The alternating current module 3.2 measures the phase currents on the consumer side and neutral side of a generator. The ACM3.2 uses the measurements to detect phase-to-phase faults or phase-to-earth faults in earthed generator systems.

    ]]>     The alternating current module 3.2 measures the phase currents on the consumer side and neutral side of a generator. The ACM3.2 uses the measurements to detect phase-to-phase faults or phase-to-earth faults in earthed generator systems. The protection consists of:

    • A stabilized stage that uses a dual-slope operating characteristic. This current restraint approach is also known as biased differential protection.
    • A high set differential stage (non-stabilized).
    • Protection includes ANSI 87G differential protection for generators
    ]]>     Physical connections
    • 1 × 3-phase current measurement consumer side
      • 1 or 5 A AC (nominal)
    • 1 × 3-phase current measurement neutral side 
      • 1 or 5 A AC (nominal)

    Current measurement characteristics

    The ACM3.2 has two sets of terminals for current measurement. 

    • The first set of terminals measures the current at the consumer side of the generator. 
    • The second set of terminals measures the current at the neutral side of the generator. 
    • The ACM3.2 uses these measurements for logging, alarms and protective functions relating to differential current protection in the system.

    Frequency measurements

    • Provides robust frequency detection in environments with electrical noise.

    Protection

    • ANSI 87G differential protection for generators
    ]]>         ACM3.1 e7d6a9be-5db8-486f-a84a-2b00bb57a2f3 https://www.deif.com/products/modules/alternating-current/acm31/ module The alternating current module measures the voltage and current on one side of a breaker, and the voltage on the other side. The hardware module responds when the measurements exceed the AC alarm parameters.

    ]]>     The alternating current module measures the voltage and current on one side of a breaker, and the voltage on the other side. The hardware module responds when the measurements exceed the AC alarm parameters. ACM3.1 uses the AC measurements to check the synchronization before the breaker closes.

    ACM3.1 provides robust frequency detection in environments with electrical noise. ACM3.1 allows extended measurement bandwidth up to 40 times the nominal frequency. ACM3.1 includes a configurable 4th current measurement.

    Default: ACM3.1 measures 3-phase systems. Optional: Select split-phase (1-phase, 3-wire, for example, L1-N-L2) or single-phase (1-phase, 2-wire, for example, L1-N)

    ]]>     Physical connections

    • 2 × 3-phase voltage measurements (L1, L2, L3 and N)
      • 100 to 690 V AC phase-to-phase (nominal)
    • 1 × 3-phase current measurement and 4th current measurement ((L1, L2, L3 and 4th)
      • 1 or 5 A, AC (nominal)

    Voltage measurement characteristics 

    • The ACM has two sets of terminals for voltage measurement. The first set of terminals measures the voltage on the busbar. The second set of terminals measures the voltage from the source. The ACM uses these measurements for logging, alarms and protective functions.

    Current measurement characteristics

    • The ACM measures the current, then uses these measurements for logging, alarms and protective functions.

    Power measurements

    • For power functions, the second set of voltage measurements and the current measurements from the ACM are used together.

    Frequency measurements

    • Provides robust frequency detection in environments with electrical noise.
    ]]>         EIM3.1 d9b4c8f7-f1f3-4ec3-87cc-26f35ec445db https://www.deif.com/products/modules/engine-interface/eim31/ module The engine interface module has its own power supply and a tach input to measure speed. It also has four relay outputs, four digital inputs, and three analogue inputs. These I/Os are configurable.

    ]]>     The engine interface module has its own power supply and a tach input to measure speed. It also has four relay outputs, four digital inputs, and three analogue inputs. These I/Os are configurable.

    The power supply terminals include circuit protection against load dump transients and JEM177 surge transients (rugged design).

    ]]>     Physical Connections
    • Supply
      • 12 or 24V DC Power supply and frame ground
    • 3 x Relay output—Configurable
      • 30 V DC, and 6 A
    • 1 x Relay output with wire break detection*- configurable
      • 30 V DC, and 6 A
    • 4 x Digital inputs—configurable (Bipolar
      • ON: -36 to -8 V DC, and 8 to 36 V DC
      • OFF: -2 to 2 V DC
      • Voltage withstand: ±36 V DC
    • 1 x Magnetic pickup with wire break detection* **
      • 3 to 70 V AC peak
      • 2 to 20,000 Hz
      • Can be useful during start-up, when the generator frequency is too low to be a reliable indication of genset speed 
    • 1 x Generator tach input or NPN/PNP sensor **
      • 8 to 36 V DC
      • 2 to 20,000 Hz
      • Typically signal from one of the phases of the generator.
      • Can be useful during start-up, when the generator frequency is too low to be a reliable indication of genset speed 
    • 3 x Analogue current or resistance measurement inputs (RMI)—configurable
      • Current standard 0 to 20 mA, 4 to 20 mA or configurable 0 to 25 mA
      • Pt100/1000 -40 to 250 °C (-40 to 482 °F)
      • Resistance Any custom range between 0 and 2.5 kΩ
      • Digital input Dry contact with cable supervision maximum 330 Ω for ON detection

    Supply voltage low alarm

    • The alarm is activated when the power supply voltage is less than the setpoint for the delay time.

    Supply voltage high alarm

    • The alarm is activated when the power supply voltage exceeds the set point for the delay time

    Magnetic pickup wire break

    • This alarm is for magnetic pickup wire break. If the engine is running, but there is no pulse for 2 seconds, then the controller monitors the cable. If there is no change during the alarm delay time, then the controller activates the alarm.

    Auxiliary power supply voltage as an analogue output

    • You can configure an analogue output with a function for the auxiliary power supply voltage. The controller then adjusts the analogue output to reflect the operating value.
    • An analogue output with the power supply voltage may be wired to a switchboard instrument. The operator can then see if the auxiliary power supply fails.

    *Note: These inputs cannot both be used at the same time.

    **Note You cannot use both the MPU and tach input at the same time

    All analogue multi-functional inputs for EIM3.1 have a common ground

    ]]>         ABS 26-0515764-PDA UK.pdf https://deif-cdn-umbraco.azureedge.net/media/3eihanw3/abs-26-0515764-pda-uk.pdf?rnd=134263410918430000&v=9 367010f1-f2dd-49f3-974d-a8978ea948c3 PPM_300 Fri, 19 Jun 2026 11:11:31 GMT 2026-06-19T11:11:31+00:00 2026-06-19T11:11:31+00:00 eng document A Approvals/Certifications PICUS manual 4189341362 UK.pdf https://deif-cdn-umbraco.azureedge.net/media/amjldxj2/picus-manual-4189341362-uk.pdf?rnd=134249763047700000&v=9 dda1131b-203c-482b-b125-6dacb2d293e0 iE_250 Wed, 03 Jun 2026 16:05:04 GMT 2026-06-03T16:05:04+00:00 2026-06-03T16:05:04+00:00 eng document I User's Manual KRS CPH06107-AC005 UK.pdf https://deif-cdn-umbraco.azureedge.net/media/zw3pq5vt/krs-cph06107-ac005-uk.pdf?rnd=134248627275330000&v=9 7ee8bbd5-efb3-4596-a34e-0e879f854fa8 PPM_300 Tue, 02 Jun 2026 08:32:07 GMT 2026-06-02T08:32:07+00:00 2026-06-02T08:32:07+00:00 eng document B Approvals/Certifications PPM 300 安装说明 4189340909 中文.pdf https://deif-cdn-umbraco.azureedge.net/media/bd4j3dkj/ppm-300-安装说明-4189340909-中文.pdf?rnd=134244336247900000&v=9 8d9efd10-8d49-4993-83c8-2170630122f4 PPM_300 Thu, 28 May 2026 09:20:24 GMT 2026-05-28T09:20:24+00:00 2026-05-28T09:20:24+00:00 zho document T Installation Instructions PICUS manual 4189341362 DE.pdf https://deif-cdn-umbraco.azureedge.net/media/oojkkmu1/picus-manual-4189341362-de.pdf?rnd=134243621841100000&v=9 32a5926b-5e9b-4658-ba6c-a99dc7996c87 iE_250 Wed, 27 May 2026 13:29:44 GMT 2026-05-27T13:29:44+00:00 2026-05-27T13:29:44+00:00 deu document F User's Manual iE 250 iE 350 ML300 Modbus Texts 4189341365 UK.xlsx https://deif-cdn-umbraco.azureedge.net/media/4byhj350/ie-250-ie-350-ml300-modbus-texts-4189341365-uk.xlsx?rnd=134212372009000000&v=9 f77470e8-cdfa-45fc-90a2-d1c8908a8736 iE_250 Tue, 21 Apr 2026 09:26:40 GMT 2026-04-21T09:26:40+00:00 2026-04-21T09:26:40+00:00 eng document F Communication PICUS manual 4189341362 IT.pdf https://deif-cdn-umbraco.azureedge.net/media/dj5g55u5/picus-manual-4189341362-it.pdf?rnd=134204096073700000&v=9 fe6f7e02-389f-478b-a1e5-09a309c47260 iE_250 Sat, 11 Apr 2026 19:33:27 GMT 2026-04-11T19:33:27+00:00 2026-04-11T19:33:27+00:00 ita document F User's Manual PICUS manual 4189341362 FR.pdf https://deif-cdn-umbraco.azureedge.net/media/laudkud4/picus-manual-4189341362-fr.pdf?rnd=134204094691230000&v=9 50352940-cd7e-4359-915f-5b1fcbd3cd90 iE_250 Sat, 11 Apr 2026 19:31:09 GMT 2026-04-11T19:31:09+00:00 2026-04-11T19:31:09+00:00 fra document F User's Manual PICUS manual 4189341362 ES.pdf https://deif-cdn-umbraco.azureedge.net/media/kkfp2omp/picus-manual-4189341362-es.pdf?rnd=134204093382070000&v=9 39fe8b4a-e28f-447a-842c-0a28e35969f3 iE_250 Sat, 11 Apr 2026 19:28:58 GMT 2026-04-11T19:28:58+00:00 2026-04-11T19:28:58+00:00 spa document F User's Manual Omni Engine interface communication 4189341306 UK.pdf https://deif-cdn-umbraco.azureedge.net/media/vtaghavu/omni-engine-interface-communication-4189341306-uk.pdf?rnd=134193404381930000&v=9 8263c0b4-d9b4-48f2-a24c-a76ffbf31cc1 GPC_300 Mon, 30 Mar 2026 10:33:58 GMT 2026-03-30T10:33:58+00:00 2026-03-30T10:33:58+00:00 eng document I Communication PICUS manual 4189341362 BR.pdf https://deif-cdn-umbraco.azureedge.net/media/wkxp1ktj/picus-manual-4189341362-br.pdf?rnd=134151908179400000&v=9 aaedafaa-fd69-4d1d-be00-8ab48d3c6e91 iE_250 Tue, 10 Feb 2026 09:53:37 GMT 2026-02-10T09:53:37+00:00 2026-02-10T09:53:37+00:00 por document C User's Manual PPM 300 Designers handbook 4189341333 UK.pdf https://deif-cdn-umbraco.azureedge.net/media/fgtlsiv1/ppm-300-designers-handbook-4189341333-uk.pdf?rnd=134140665592570000&v=9 22a9a731-96bb-46ad-9f6d-c99ffcb0e049 PPM_300 Wed, 28 Jan 2026 09:35:59 GMT 2026-01-28T09:35:59+00:00 2026-01-28T09:35:59+00:00 eng document E Designer's Handbook PPM 300 Data sheet 4921240647 UK.pdf https://deif-cdn-umbraco.azureedge.net/media/lurih1q2/ppm-300-data-sheet-4921240647-uk.pdf?rnd=134139934226870000&v=9 ee832245-021c-4dad-adf7-97008bc32699 PPM_300 Tue, 27 Jan 2026 13:17:02 GMT 2026-01-27T13:17:02+00:00 2026-01-27T13:17:02+00:00 eng document B Data Sheet CE DoC 4910290104 UK.pdf https://deif-cdn-umbraco.azureedge.net/media/2ebnavm3/ce-doc-4910290104-uk.pdf?rnd=134127004733170000&v=9 55d002f9-949d-40aa-95de-9d8a3911c3c3 PPM_300 Mon, 12 Jan 2026 14:07:53 GMT 2026-01-12T14:07:53+00:00 2026-01-12T14:07:53+00:00 eng document J Approvals/Certifications PPM 300 Installation instructions 4189340909 BR.pdf https://deif-cdn-umbraco.azureedge.net/media/rlypjsjf/ppm-300-installation-instructions-4189340909-br.pdf?rnd=134122562572470000&v=9 c9f4f092-c525-431b-94e6-b1a455d77e7f PPM_300 Wed, 07 Jan 2026 10:44:17 GMT 2026-01-07T10:44:17+00:00 2026-01-07T10:44:17+00:00 por document T Installation Instructions UL CoC E339342-20140927 - UL Listed (2016-10) UK.PDF (1) https://deif-cdn-umbraco.azureedge.net/media/3a2l2xzv/ul-coc-e339342-20140927-ul-listed-2016-10-uk.pdf?rnd=134106289302070000&v=9 5fae39f0-6e35-441c-b91d-bac345afe46a PPM_300 Fri, 19 Dec 2025 14:42:10 GMT 2025-12-19T14:42:10+00:00 2025-12-19T14:42:10+00:00 eng document A Archived Certificates UL CoC E314309-20140627 – UL Listed (2016-10) UK.PDF https://deif-cdn-umbraco.azureedge.net/media/gyzl4p0i/ul-coc-e314309-20140627-ul-listed-2016-10-uk.pdf?rnd=134106281099800000&v=9 3faf332e-7048-4d12-a96e-e09ae3570fb3 PPM_300 Fri, 19 Dec 2025 14:28:29 GMT 2025-12-19T14:28:29+00:00 2025-12-19T14:28:29+00:00 eng document A Archived Certificates UL CoC E339342-20140927 - UL Listed (2025-11) UK.pdf https://deif-cdn-umbraco.azureedge.net/media/iban3rwl/ul-coc-e339342-20140927-ul-listed-2025-11-uk.pdf?rnd=134106271302800000&v=9 c6de4058-d1cb-43b5-963b-993f2a0aba45 iE_350 Fri, 19 Dec 2025 14:12:10 GMT 2025-12-19T14:12:10+00:00 2025-12-19T14:12:10+00:00 eng document A Approvals/Certifications UL CoC E314309-20140627 - UL Listed (2025-05) UK.pdf (1) https://deif-cdn-umbraco.azureedge.net/media/qubdfdng/ul-coc-e314309-20140627-ul-listed-2025-05-uk.pdf?rnd=134106269026370000&v=9 8d32029d-6fa6-4ae5-b9c8-0d58ccb9bc18 iE_350 Fri, 19 Dec 2025 14:08:22 GMT 2025-12-19T14:08:22+00:00 2025-12-19T14:08:22+00:00 eng document A Approvals/Certifications DNV TAA00003FC UK.pdf https://deif-cdn-umbraco.azureedge.net/media/k5zifs1c/dnv-taa00003fc-uk.pdf?rnd=134100413407270000&v=9 cb82f24f-b762-42a8-af5c-122843132546 iE_350_MARINE Fri, 12 Dec 2025 19:29:00 GMT 2025-12-12T19:29:00+00:00 2025-12-12T19:29:00+00:00 eng document B Approvals/Certifications RINA ELE060125XP UK.pdf https://deif-cdn-umbraco.azureedge.net/media/urzjqlj1/rina-ele060125xp-uk.pdf?rnd=134097631199400000&v=9 2d9872bc-273b-4cc3-9fa4-2747aae37c30 iE_250 Tue, 09 Dec 2025 14:11:59 GMT 2025-12-09T14:11:59+00:00 2025-12-09T14:11:59+00:00 eng document A Approvals/Certifications General safety note 4189341189 UK-FR.pdf https://deif-cdn-umbraco.azureedge.net/media/t3ofzpjw/general-safety-note-4189341189-uk-fr.pdf?rnd=134045044194400000&v=9 bd5c5d87-9036-4df9-881e-cc1bd5ed3b40 MDR-2 Thu, 09 Oct 2025 17:26:59 GMT 2025-10-09T17:26:59+00:00 2025-10-09T17:26:59+00:00 eng document C Other Technical Documentation LR LR2024766TA-03 UK.PDF https://deif-cdn-umbraco.azureedge.net/media/rqchau3r/lr-lr2024766ta-03-uk.pdf?rnd=134003267695430000&v=9 53700494-15b1-490a-ace4-fe50284c9910 GPU_300 Fri, 22 Aug 2025 08:59:29 GMT 2025-08-22T08:59:29+00:00 2025-08-22T08:59:29+00:00 eng document C Approvals/Certifications ABS 25-0278636-1-1-PDA UK.PDF https://deif-cdn-umbraco.azureedge.net/media/qgpd52q2/abs-25-0278636-1-1-pda-uk.pdf?rnd=133971461543800000&v=9 f23f9f99-fb1c-4f60-9091-c21f253348b6 PPM_300 Wed, 16 Jul 2025 13:29:14 GMT 2025-07-16T13:29:14+00:00 2025-07-16T13:29:14+00:00 eng document A Approvals/Certifications LR SWC LR23367708SS-02 UK.pdf https://deif-cdn-umbraco.azureedge.net/media/mucbjgzg/lr-swc-lr23367708ss-02-uk.pdf?rnd=133971441314900000&v=9 9b14047d-e526-4525-a110-3e0be5b30437 iE_350_MARINE Wed, 16 Jul 2025 12:55:31 GMT 2025-07-16T12:55:31+00:00 2025-07-16T12:55:31+00:00 eng document B Approvals/Certifications Rack and module 2D CAD drawings.zip https://deif-cdn-umbraco.azureedge.net/media/42aflssd/rack-and-module-2d-cad-drawings.zip?rnd=133909096380300000&v=9 ca5500ef-f843-499b-adec-3fd17c235398 iE_350 Mon, 05 May 2025 09:07:18 GMT 2025-05-05T09:07:18+00:00 2025-05-05T09:07:18+00:00 eng document B Drawings Module 3D STEP-files.zip https://deif-cdn-umbraco.azureedge.net/media/mqqb0o53/module-3d-step-files.zip?rnd=133864375685900000&v=9 3b1d207c-38fd-471a-b424-49ddbaf8fbe7 iE_350 Fri, 14 Mar 2025 14:52:48 GMT 2025-03-14T14:52:48+00:00 2025-03-14T14:52:48+00:00 eng document A Drawings Rack 2D PDFs.zip https://deif-cdn-umbraco.azureedge.net/media/3bafvz31/rack-2d-pdfs.zip?rnd=133864375169270000&v=9 e75a41f0-bdbb-4916-b68d-1d29a2a2ae7b iE_350 Fri, 14 Mar 2025 14:51:56 GMT 2025-03-14T14:51:56+00:00 2025-03-14T14:51:56+00:00 eng document A Drawings Rack and module 3D PDFs.zip https://deif-cdn-umbraco.azureedge.net/media/jzdgxwz0/rack-and-module-3d-pdfs.zip?rnd=133864374192800000&v=9 db6b4656-cf3a-4b83-9323-aeca2bf83529 iE_350 Fri, 14 Mar 2025 14:50:19 GMT 2025-03-14T14:50:19+00:00 2025-03-14T14:50:19+00:00 eng document A Drawings Rack and module 3D STEP-files.zip https://deif-cdn-umbraco.azureedge.net/media/bprh432z/rack-and-module-3d-step-files.zip?rnd=133864373701330000&v=9 777fe213-8d99-4934-964a-8cc0dd0f0fa7 iE_350 Fri, 14 Mar 2025 14:49:30 GMT 2025-03-14T14:49:30+00:00 2025-03-14T14:49:30+00:00 eng document A Drawings Rack and module SVGs.zip https://deif-cdn-umbraco.azureedge.net/media/ycan4dnw/rack-and-module-svgs.zip?rnd=133864291718370000&v=9 0ddf81d8-ecb6-4338-bf68-8908b91a5b87 iE_350 Fri, 14 Mar 2025 12:32:51 GMT 2025-03-14T12:32:51+00:00 2025-03-14T12:32:51+00:00 eng document A Drawings Rack and module PNGs.zip https://deif-cdn-umbraco.azureedge.net/media/0tji2cej/rack-and-module-pngs.zip?rnd=133864290818930000&v=9 088ed2cc-1a89-48c5-b1a7-012c3af2ce4d iE_350 Fri, 14 Mar 2025 12:31:21 GMT 2025-03-14T12:31:21+00:00 2025-03-14T12:31:21+00:00 eng document A Drawings DU 300 2D CAD drawing.dwg https://deif-cdn-umbraco.azureedge.net/media/vgohijm5/du-300-2d-cad-drawing.dwg?rnd=133864288628800000&v=9 25749cb1-629f-4e0f-9537-33f7dfa6b84c PPM_300 Fri, 14 Mar 2025 12:27:42 GMT 2025-03-14T12:27:42+00:00 2025-03-14T12:27:42+00:00 eng document A Drawings PPM 300 Installation instructions 4189340909 UK.pdf https://deif-cdn-umbraco.azureedge.net/media/3dvhdnzs/ppm-300-installation-instructions-4189340909-uk.pdf?rnd=133857276839600000&v=9 b771ebf0-6232-4a50-8b3a-718b21119c79 PPM_300 Thu, 06 Mar 2025 09:41:23 GMT 2025-03-06T09:41:23+00:00 2025-03-06T09:41:23+00:00 eng document T Installation Instructions PPM 300 Modbus tables 4189341079 UK.XLSX https://deif-cdn-umbraco.azureedge.net/media/zizlfabe/ppm-300-modbus-tables-4189341079-uk.xlsx?rnd=133776909492430000&v=9 80b232d2-4b24-4e5e-8e08-574b9de2185c PPM_300 Tue, 03 Dec 2024 09:15:49 GMT 2024-12-03T09:15:49+00:00 2024-12-03T09:15:49+00:00 eng document S Communication CCS GB24PTB00043 UK.pdf https://deif-cdn-umbraco.azureedge.net/media/v3fpy5yf/ccs-gb24ptb00043-uk.pdf?rnd=133758032750600000&v=9 7ffc4bb7-bd05-4a83-94d7-ba3e84b52144 GPU_300 Mon, 11 Nov 2024 12:54:35 GMT 2024-11-11T12:54:35+00:00 2024-11-11T12:54:35+00:00 eng document A Approvals/Certifications UKCA DoC 4910290604 UK.pdf https://deif-cdn-umbraco.azureedge.net/media/duqb1yxp/ukca-doc-4910290604-uk.pdf?rnd=133743430663030000&v=9 e21d2105-e3ef-4eff-9acb-c8eb2b3d9e98 PPM_300 Fri, 25 Oct 2024 15:17:46 GMT 2024-10-25T15:17:46+00:00 2024-10-25T15:17:46+00:00 eng document B Approvals/Certifications CRS 03-002045-031724 UK.pdf https://deif-cdn-umbraco.azureedge.net/media/3f1gpovz/crs-03-002045-031724-uk.pdf?rnd=133646646470430000&v=9 ba6776f1-d5b9-478b-b20f-9589d55bd147 GPU_300 Fri, 05 Jul 2024 14:50:47 GMT 2024-07-05T14:50:47+00:00 2024-07-05T14:50:47+00:00 eng document A Approvals/Certifications ML 300 EPLAN with macro.zip https://deif-cdn-umbraco.azureedge.net/media/kbzpucp2/ml-300-eplan-with-macro.zip?rnd=133630896412930000&v=9 09fa7348-b7fc-4ae7-be3a-2861f79a53fb PPM_300 Mon, 17 Jun 2024 09:20:41 GMT 2024-06-17T09:20:41+00:00 2024-06-17T09:20:41+00:00 eng document B Drawings ML 300 DU 300 3D STEP-file.zip https://deif-cdn-umbraco.azureedge.net/media/v2gj0uch/ml-300-du-300-3d-step-file.zip?rnd=133627449803330000&v=9 508d0db7-7047-49bb-8e6a-7e14e02e9c4a PPM_300 Thu, 13 Jun 2024 09:36:20 GMT 2024-06-13T09:36:20+00:00 2024-06-13T09:36:20+00:00 eng document A Drawings ML 300 DU 300 2D PDF.pdf https://deif-cdn-umbraco.azureedge.net/media/00wl4uk3/ml-300-du-300-2d-pdf.pdf?rnd=133627436173830000&v=9 51afadce-e35d-45f0-bbe4-bec59c719f37 PPM_300 Thu, 13 Jun 2024 09:13:37 GMT 2024-06-13T09:13:37+00:00 2024-06-13T09:13:37+00:00 eng document B Drawings DNV TAA00001K7_6 UK.pdf https://deif-cdn-umbraco.azureedge.net/media/u41jtnef/dnv-taa00001k7_6-uk.pdf?rnd=133578926252070000&v=9 b499b6bf-6c85-466b-83da-a1588169c60c PPM_300 Thu, 18 Apr 2024 05:43:45 GMT 2024-04-18T05:43:45+00:00 2024-04-18T05:43:45+00:00 eng document F Approvals/Certifications PPM 300 选型手册 4921240647 中文.pdf https://deif-cdn-umbraco.azureedge.net/media/z23hzyon/ppm-300-选型手册-4921240647-中文.pdf?rnd=133578926242570000&v=9 e16c3bd7-14cd-493c-8a4a-a698c6edbad3 PPM_300 Thu, 18 Apr 2024 05:43:44 GMT 2024-04-18T05:43:44+00:00 2024-04-18T05:43:44+00:00 zho document A Data Sheet PPM 300 Data sheet 4921240647 FR.pdf https://deif-cdn-umbraco.azureedge.net/media/hpgacem5/ppm-300-data-sheet-4921240647-fr.pdf?rnd=133578926227770000&v=9 1101cc23-779f-4011-9544-cf9d81fe5db4 PPM_300 Thu, 18 Apr 2024 05:43:42 GMT 2024-04-18T05:43:42+00:00 2024-04-18T05:43:42+00:00 fra document A Data Sheet ML-2 Application notes Converting PPM-3 to PPM 300 4189341334 UK.pdf https://deif-cdn-umbraco.azureedge.net/media/uwyb3zw3/ml-2-application-notes-converting-ppm-3-to-ppm-300-4189341334-uk.pdf?rnd=133578926225300000&v=9 e61eb0bd-02dd-475b-bc09-2b18d1b69159 PPM_300 Thu, 18 Apr 2024 05:43:42 GMT 2024-04-18T05:43:42+00:00 2024-04-18T05:43:42+00:00 eng document C Application Notes PPM 300 Datenblatt 4921240647 DE.pdf https://deif-cdn-umbraco.azureedge.net/media/fxziwrtp/ppm-300-datenblatt-4921240647-de.pdf?rnd=133578926213800000&v=9 468bf235-1b6f-41a2-ae40-8a1a1197786c PPM_300 Thu, 18 Apr 2024 05:43:41 GMT 2024-04-18T05:43:41+00:00 2024-04-18T05:43:41+00:00 deu document A Data Sheet RINA ELE070522XP UK.PDF https://deif-cdn-umbraco.azureedge.net/media/q0gg2rwn/rina-ele070522xp-uk.pdf?rnd=133578926190170000&v=9 466e8c9e-6bcd-464d-9350-295832f78cbc PPM_300 Thu, 18 Apr 2024 05:43:39 GMT 2024-04-18T05:43:39+00:00 2024-04-18T05:43:39+00:00 eng document A Approvals/Certifications BV 42536 C0 BV UK.PDF https://deif-cdn-umbraco.azureedge.net/media/o50d5sid/bv-42536-c0-bv-uk.pdf?rnd=133578926123670000&v=9 c93ff56f-3803-401b-8f61-dc5f016571e2 PPM_300 Thu, 18 Apr 2024 05:43:32 GMT 2024-04-18T05:43:32+00:00 2024-04-18T05:43:32+00:00 eng document A Approvals/Certifications PPM 300 Manual del operador 4189340910 ES.pdf https://deif-cdn-umbraco.azureedge.net/media/ee5b2sk4/ppm-300-manual-del-operador-4189340910-es.pdf?rnd=133578926088300000&v=9 490e3f39-365e-4b53-8c07-d8bda2507fd9 PPM_300 Thu, 18 Apr 2024 05:43:28 GMT 2024-04-18T05:43:28+00:00 2024-04-18T05:43:28+00:00 spa document T Operator's Manual ML-2 Application notes, Converting PPM-2 to PPM 300 4189341202.pdf https://deif-cdn-umbraco.azureedge.net/media/3jhnafyz/ml-2-application-notes-converting-ppm-2-to-ppm-300-4189341202.pdf?rnd=133578926079070000&v=9 17c04ff2-6619-4588-be15-8b748809e233 PPM_300 Thu, 18 Apr 2024 05:43:27 GMT 2024-04-18T05:43:27+00:00 2024-04-18T05:43:27+00:00 eng document B Application Notes PPM 300 Product sheet 4189341266 UK.pdf https://deif-cdn-umbraco.azureedge.net/media/pldm0a1h/ppm-300-product-sheet-4189341266-uk.pdf?rnd=133578926006370000&v=9 03cdc662-7367-40b0-b302-63caaa41fe6d PPM_300 Thu, 18 Apr 2024 05:43:20 GMT 2024-04-18T05:43:20+00:00 2024-04-18T05:43:20+00:00 eng document E Brochures/Handouts CNK_20A023/21CP005_UK.PDF https://deif-cdn-umbraco.azureedge.net/media/scbo40oc/cnk_20a023-21cp005_uk.pdf?rnd=133578925936930000&v=9 69ef8288-18c2-4246-b4aa-eed2158711c6 PPM_300 Thu, 18 Apr 2024 05:43:13 GMT 2024-04-18T05:43:13+00:00 2024-04-18T05:43:13+00:00 eng document A Approvals/Certifications Type certificate DU 300 4124030080 UK.pdf https://deif-cdn-umbraco.azureedge.net/media/1uwobz22/type-certificate-du-300-4124030080-uk.pdf?rnd=133578925724430000&v=9 e7e02cc5-5d9c-428e-9795-954142b88d56 PPM_300 Thu, 18 Apr 2024 05:42:52 GMT 2024-04-18T05:42:52+00:00 2024-04-18T05:42:52+00:00 eng document A Approvals/Certifications PPM 300 Operators manual 4189340910 DE.pdf https://deif-cdn-umbraco.azureedge.net/media/s1yl3zw5/ppm-300-operators-manual-4189340910-de.pdf?rnd=133578925700700000&v=9 e6bef18e-25df-460d-a77f-0a33efd19c58 PPM_300 Thu, 18 Apr 2024 05:42:50 GMT 2024-04-18T05:42:50+00:00 2024-04-18T05:42:50+00:00 deu document T Operator's Manual PPM 300 Operators manual 4189340910 BR.pdf https://deif-cdn-umbraco.azureedge.net/media/mucn3yfl/ppm-300-operators-manual-4189340910-br.pdf?rnd=133578925640870000&v=9 e0de047d-7fab-4e80-93e1-49c1e096eb2e PPM_300 Thu, 18 Apr 2024 05:42:44 GMT 2024-04-18T05:42:44+00:00 2024-04-18T05:42:44+00:00 por document T Operator's Manual CCS_GB20PTB00017_02_UK.PDF https://deif-cdn-umbraco.azureedge.net/media/onnht4b2/ccs_gb20ptb00017_02_uk.pdf?rnd=133578925472200000&v=9 f8795b6b-d23c-4661-ab44-1279f0df986e GPU_300 Thu, 18 Apr 2024 05:42:27 GMT 2024-04-18T05:42:27+00:00 2024-04-18T05:42:27+00:00 eng document A Approvals/Certifications Type certificate 4124030079 UK.PDF https://deif-cdn-umbraco.azureedge.net/media/qvgodrdk/type-certificate-4124030079-uk.pdf?rnd=133578925335470000&v=9 c4e14c9d-aa6a-4cf8-a81c-c1a0511d88b0 PPM_300 Thu, 18 Apr 2024 05:42:13 GMT 2024-04-18T05:42:13+00:00 2024-04-18T05:42:13+00:00 eng document B Approvals/Certifications MEPC 197(62) MD Multi-line 300 series 4123000044B UK.PDF https://deif-cdn-umbraco.azureedge.net/media/fjupjm5h/mepc-197-62-md-multi-line-300-series-4123000044b-uk.pdf?rnd=133578925067230000&v=9 b3e46932-63e7-4d0b-b3f0-0b5cd36a9c59 GPU_300 Thu, 18 Apr 2024 05:41:46 GMT 2024-04-18T05:41:46+00:00 2024-04-18T05:41:46+00:00 eng document B Approvals/Certifications PPM 300 Operator's manual 4189340910 UK.pdf https://deif-cdn-umbraco.azureedge.net/media/22ic3fzt/ppm-300-operator-s-manual-4189340910-uk.pdf?rnd=133578925002570000&v=9 972e10ff-2e33-4dc4-84ca-da055d69a71b PPM_300 Thu, 18 Apr 2024 05:41:40 GMT 2024-04-18T05:41:40+00:00 2024-04-18T05:41:40+00:00 eng document T Operator's Manual Application note PPM 300 Modbus template information for PPM-2 retrofit 4189341251 UK.pdf https://deif-cdn-umbraco.azureedge.net/media/2l4bniia/application-note-ppm-300-modbus-template-information-for-ppm-2-retrofit-4189341251-uk.pdf?rnd=133578924933300000&v=9 a116fcfa-f600-4f91-8851-bd16a6aedaf1 PPM-2 Thu, 18 Apr 2024 05:41:33 GMT 2024-04-18T05:41:33+00:00 2024-04-18T05:41:33+00:00 eng document A Application Notes PPM 300 Operator's manual 4189340910 FR.pdf https://deif-cdn-umbraco.azureedge.net/media/41riw2la/ppm-300-operator-s-manual-4189340910-fr.pdf?rnd=133578924648770000&v=9 718be2ee-7260-4f36-afbc-484c71399609 PPM_300 Thu, 18 Apr 2024 05:41:04 GMT 2024-04-18T05:41:04+00:00 2024-04-18T05:41:04+00:00 fra document T Operator's Manual MEPC 197(62) MD DU 300 4123000045B UK.PDF https://deif-cdn-umbraco.azureedge.net/media/3zydsz3r/mepc-197-62-md-du-300-4123000045b-uk.pdf?rnd=133578924362530000&v=9 673971f6-d0b1-42c9-a3f8-7040327de995 GPU_300 Thu, 18 Apr 2024 05:40:36 GMT 2024-04-18T05:40:36+00:00 2024-04-18T05:40:36+00:00 eng document B Approvals/Certifications PPM 300 Data sheet 4921240464 BR.pdf https://deif-cdn-umbraco.azureedge.net/media/xlmliivc/ppm-300-data-sheet-4921240464-br.pdf?rnd=133578923982400000&v=9 22a4d9a2-f7a2-48c5-acd5-0e422ce1139a PPM_300 Thu, 18 Apr 2024 05:39:58 GMT 2024-04-18T05:39:58+00:00 2024-04-18T05:39:58+00:00 por document A Data Sheet PPM 300 操作手册 4189340910 中文.pdf https://deif-cdn-umbraco.azureedge.net/media/v2nowdtc/ppm-300-操作手册-4189340910-中文.pdf?rnd=133578922891230000&v=9 0eeb1ab7-3b62-4fe8-b44b-8dee67a2c2d2 PPM_300 Thu, 18 Apr 2024 05:38:09 GMT 2024-04-18T05:38:09+00:00 2024-04-18T05:38:09+00:00 zho document T Operator's Manual Multi-line 300 PPM 300 - v1.0.27.2 https://www.deif.com/software/multi-line-300-ppm-300/1-0-27-2/ bf92a075-c5ec-463f-9fc8-4e723a61708a 2026-04-14T00:00:00+00:00 software-version Multi-line 300 PPM 300 General Software 1.0.27.2 current Corrections
    • Fixed the EtherCAT® configuration handling to prevent unsafe behaviour.
    ]]>         PICUS ver. 1.x.x. - v1.0.28.0 https://www.deif.com/software/picus-ver-1xx/1-0-28-0/ e356ab97-827d-4605-8908-baeec1a7e272 2026-07-16T00:00:00+00:00 software-version PICUS ver. 1.x.x. Utility Software 1.0.28.0 current New features
    • Custom Commands
      Delivers flexible, user-defined commands that can be tailored to customer workflows, improving usability, consistency across PICUS and Display, and integration capabilities across all interfaces.
    • Custom Data Input for Display
      Enables customers to create and manage custom live data for dashboards, trending, logic, and integrations, providing greater flexibility while improving access control and configuration efficiency.
    • Browser Widget
      Allows web-based content to be embedded directly into displays, improving operator efficiency through integrated information access, streamlined dashboard design, and enhanced user feedback.
    • Export of Logs
      Simplifies troubleshooting, reporting, and compliance activities by enabling the export of operational and diagnostic data in standard CSV format for external analysis and documentation.
    • Custom Parameters and Custom Alarms customisation
      Enhances system customisation by allowing customers to adapt parameter and alarm terminology to their operational needs, improving consistency, usability, and operator experience throughout the application.

    Corrections

    • PICUS: Symbols disappeared when searching in the log table.
    • PICUS: Advanced parameter settings did not show default values.
    • Time format could not be changed from AM to PM.
    • Controller was missing from the list of controllers when broadcasting a restore folder.
    • “Invalid format” message appeared in the header when the data format differed.
    • Time zone setting did not have any effect.
    • PICUS: Engine communication was shown on the wrong CAN port.
    • iE 250 LF: Alarm page column width adjustment issues on PICUS.
    • iE 250 LF: Expand all did not work.
    • iE 250 LF: Collapse all did not work.
    • PICUS, Display Designer - header: Drag-and-drop failed when dragging multiple instances of the same widget to the header.
    • iE 250 LF: Using a .config file to move custom Modbus protocol settings caused issues.
    • PICUS, Event log and alarms: Icons were missing after search.
    • PICUS, Alarms: No information was shown for the selected alarm after searching.
    • PICUS: Expand/collapse information did not work.
    • PICUS, iE 250 Marine: It was not possible to configure decimal points for alarm set points on analogue inputs.
    • iE 250 LF: Time settings were not readable.
    • iE 250 LC: Emulation – Single-line diagram was not updated.
    • PICUS: “Write” button did not provide visual feedback.
    • CPU link was not working on the About page.
    • Application became stuck on “Establishing connection” when entering the application.
    • iE 250 LC: Adding BTB to a PM system triggered “plant is not valid” when attempting to write.
    • Loading progress issue when clicking assets on the application page.
    • Alarm page: The list of warnings lost the grey border when selected.
    • Display permission requirements were not shown on unauthorised actions in Alarms.
    • I/O configuration: Input field removed 0, making it impossible to enter values such as 10 (reverted to 1).
    ]]>         Multi-line 300 Service Update - v202006 https://www.deif.com/software/multi-line-300-service-update/202006/ 79c605ed-3740-4eed-9902-a4efcf0d7c4e 2020-06-11T00:00:00+00:00 software-version Multi-line 300 Service Update General Software 202006 current This software package consist of:
    • Multi-line 300 Base Unit (BU) package with BSP (version 3.0.1.2)
    • Multi-line 300 Display Unit (DU) package with BSP and application (BSP version 3.0.0.2 and appl. version 1.0.13.0)
    • Multi-line 300 PICUS tool (version 1.0.12.0)
    • Service update information and guideline (202006)

    Changes:

    The service update handles an issue related to the software administration of the built-in memory in ML 300 controller.

    ]]>