Infrastructure
Keep the wheels turning
Every day, people and products are getting safely and efficiently from point A to point B thanks to thousands of air traffic control towers, toll booths, traffic lights, ferry terminals, and other critical infrastructure installations. But they can only do so as long as there is power available.
Blackouts are simply not an option. To keep supply chains working, safeguard passengers, and avoid congestion, you need to ensure that essential systems do not fail in key infrastructure facilities with a reliable critical power system.
Keep the wheels turning
DEIF can help you design a turnkey solution that keeps traffic moving
Check out the application examples below to see some of the possibilities you get with DEIF expertise and devices.
Get free tips on designing critical power applications
Control any power source in any infrastructure application
For any infrastructure application, you can use DEIF devices to design a critical power control solution that provides full redundancy, non-stop control, and efficient load management. You can use distributed control systems like the AGC-4 Mk II or iE 250 and PLC systems like the AMC 600) – and you can combine any power source in a hybrid solution, from mains and gensets to solar panels and batteries, and easily scale your solution as needed.
![AGC 150 Umbrella Umbraco[2224]](https://deif-cdn-umbraco.azureedge.net/media/n4ghkryv/agc-150-umbrella-umbraco-2224.jpg?width=580&height=360&v=1da9151cbeff490&v=9&format=webp)
Wide range of benefits
Critical power solutions can provide other benefits in addition to uninterrupted, safe operation: You can make your generation equipment available to your local utility company and provide ancillary services; you can reduce carbon emissions by integrating renewable power sources; and you can reduce operating costs by using battery storage to reduce peak loads and capacity charge rates. DEIF devices enable you to design a control solution that helps you reach these and other targets.
One knowledgeable supplier
When you work with DEIF, you only need to deal with one supplier that can handle all tasks in relation to your project. We cover everything from building management system (BMS) integration to generator selection for newbuild and retrofit projects. Most importantly, we help you keep your systems running round the clock. We can provide a complete, integrated control solution for any application that draws on our decades of know-how, and we follow up with global support.
Power management at the port of Dover
The port of Dover is Great Britain’s gateway to Europe and is recognised as one of the busiest passenger ferry ports in the world. A secure power supply for this major transport hub is essential, and when the port authorities decided to upgrade the existing generation system, they decided to use DEIF controllers.
Read our infrastructure critical power guide
-
Contact us to discuss your options
- 90 years of energy pioneering
- Manufactured at the highest standards
- Superior quality
- Unmatched service and support
- Made in Denmark
Automatic genset controller AGC-4 Mk II
- Automatic Mains Failure sequence
- Multi-master Power Management
- Power Management Core (32dg)
- Power Management Extended (>32dg)
- RMB Transformer maintenance with up to 32 gensets
- PLC logic
- Engine CANbus
- Din rail mount
- Flexible Hardware
- Additional CANbus based I/O (9 x CIO modules)
- Redundant controller
- Redundant CANbus for Power mamangement
- N+X configuration
- Close Before Excitation / Run-up synchronization from 6 seconds
- DEIF digital AVR DVC550 support
- Multi purpose PID´s
- Gridcode compliant with: VDE AR-N 4110/4105 (Medium voltage, Germany, VDE AR-N 4105 (low voltage, Germany, EN 50549-1:2019 (Europe), ENA EREC G99 (United Kingdom)
- Touch Screen Support (TDU107)
- Tier4 final/stage5
- Emulation for easy training and FAT
- Hybrid EMS support (via ASC-4)
- Heavy consumer (via ALC-4)
- Fuel optimisation
- Fully compatible with AGC 150 and ASC-4
- TÜV pending and UL approved
Programmable automation controller with EtherCAT based I/O AMC 600
General specifications
- Cold start-up/Operating temperature: -40 to 70 °C
- Storage temperature: -40 to 85 °C
- Climate: 55 °C 97 % RH condensing
- Altitude: < 4000 m
- Vibration : 2.1 g (3.2 to 50 Hz) 1.0g (13.2 to 100 Hz)
- Shock: 50 g, 11 ms, half sine
- Bump: 25 g, 6 ms, half sine
- New platform formfactor – height of just 122 mm; depth 114 mm
- Design lifetime of no less than 10 years at 40 ºC surrounding temperatures
- Backplane mounted rack ensuring stable inter-module communication during operation in the entire products lifetime
- Fully production tested control system units lowering in-sourcing costs for series production at customer
- Suitable for Stationary, mobile, wind turbine retrofit
- Increased mechanical robustness
- Increased electrical protection levels ; ESD up to 6kV, up to 4kV on power inputs and 2kV on all signal and communication power for fast transients protections
- Designed the input circuits with protections against failure connections
- Cold start up in very low-temperature without pre-heating
- Proven electronics design for demanding condensing climates
- Built-in standard EtherCAT as native communication protocol for use as distributed I/O
- High density IO modules
- 24V DC Digital Inputs, Digital Outputs, Voltage / Current Analogue Inputs, PT-100 inputs
- Condition monitoring modules with High Frequency Analogue Inputs
- Support for most widely used fieldbusses : CAN/CANopen, PROFINET, RS-422/485, TCP/IP ( OPC UA, Modbus TCP etc. )
- Warranty: 2 years (not including wearable parts) with option to 5 totally years
System software, Operating System and Programming
- Operating system software with fail-safe update
- DEIF In-house maintained OS
- Real-time Patched Linux
- Web based configuration
- Simplified update procedures (no special tools, same for OS and firmware)
- Secured Certificated based access by standard protocols
- Customer manages all users (Operator, Service and Administrator), rights and credentials
- Network configuration of the 2 independent network interfaces.
- Network Time protocol support as Client
- Fail-safe system software start up with two OS images (active and fault-back)
- Fault-tolerant file system
- Web based configuration
- User management
- Programming with CODESYS V3.5 and C/C++
- Regular updates to newest CODESYS V3.5 Service Packs
- Secure Web based visualization
Advanced Programmable Controller AMC 300
- Fully production tested control system units
- Designed for a lifetime no less than 10 years @ 40 ºC
- Suitable for Offshore, Marine and near shore environments
- Superior robustness to vibrations, bumps and shocks
- Better ESD protection, Surge protection of I/O and Power supply
- Warranty: 2 years (not including wearable parts) with option to 3 years.
- Core specifications:
- Cold start-up/Operating temperature: -40 to 70 °C
- Storage temperature: -40 to 85 °C
- Climate: 55 °C 97 % RH condensing
- Altitude: < 4000 m
- Vibration : 2.1 g (3.2 to 50 Hz) 1.0g (13.2 to 100 Hz)
- Shock: 50 g, 11 ms, half sine
- Bump: 25 g, 6 ms, half sine
- Multifunction I/O modules with 24V DC Digital Inputs, Digital Outputs, Relay Outputs, Voltage / Current Analogue Inputs, Thermocouples, PT100/1000 inputs, Frequency Counter inputs, PWM outputs.
- Direct 3-phase 690 V voltage and 1/5A current measurement with class 0.5 Power measurement
- Modular I/O concept with distributed I/O nodes based on Standard EtherCAT and supporting EtherCAT cable redundancy
- CAN/CANopen, TCP/IP, RS-422/485 serial communication interfaces
- Operating system software with fail-safe update
- DEIF In-house maintained OS
- Real-time Patched Linux
- Discover the device via hostname (mDNS services)
- Web based configuration
- Simplified update procedures (no special tools, same for OS and firmware)
- Secured Certificated based access by standard protocols
- Customer manages all users, rights and credentials
- Network config on build-in 5 port switch (VLANs)
- Network Time protocol support as both Client and Server
- Fail-safe system software start up with two OS images (active and fault-back)
- Fault-tolerant file system
- Open software development with Linux, CODESYS V3 (IEC 61131-3)
- Regular updates to newest CODESYS V3.5 Service Packs
- Modbus TCP Client and Server library
- OPC UA Server (Open62541) library
Paralleling & protection GPC 300
- Diesel Generator controller
- Engine and Generator protection
- Engine CANbus
- Generator controller
- Generator breaker control
- Mains connection protection
- Mains connection breaker control
- Mains connection controller
- BTB controller
- BTB connection breaker control
- BTB connection protection
- Single generator with mains connection application
- CODESYS PLC for advanced purpose
- AC protection
- Bus tie breaker control
- Graphical based easy-to-use plant layout
- Synchronization
- PLC logic
- Rear mount
- Flexible Hardware
- Additional I/O racks (9 racks)
- Ethernet Ring connection for Power management
- Redundant breaker feedback
- Colour Display
Digital voltage controller DVC 550
- Unique CANbus integration between DVC 550 and AGC genset controller
- Start management capability with start on threshold, soft start and close before excitation (run-up sync)
- Intelligent drying and ventilation mode for generators
- Short circuit limitation
- Loss of voltage sensing alarm
- Over/under excitation limitation
- Optimises genset performance and size using engine help functions
- Load acceptance module (LAM) assists the generator during heavy loads
- Negative forcing to avoid voltage peak during load sheddin
- U/F ramp
- Soft voltage recovery
- Stator current limitation
- Settings from AGC genset controller shared with the DVC 550 via CANbus
- Grid code compliant VDE410 and VDE4105
Automatic Load Controller ALC-4
- Prioritised load groups
- Anticipated load-dependent start
- Integrated in power management system
- Automatic startup of extra gensets
- Avoid overload of system
- Manual or automatic control of feeders
- Easy setup via USW and intuitive to use
- Easy commissioning, prepare SW setup before commissioning, live status of feeders shown in USW
- Flexible setup of different application types
- CANbus communication, long distance communication (up to 300 m)
- Security of supply – safety based on feeder priority
Automatic Sustainable Controller ASC-4 Battery
- Solar, storage, wind, Mains and genset integration in hybrid applications
- ASC-4 sustainable controllers and AGC-4 Mk II/AGC 150 let you control up to 32 gensets
- Applications with up to 16 sustainable power plants
- Simple graphical configuration
- Communicates with BCU, BMS, or PCS over Modbus
- Charging/discharging based on SOC or Schedular Command timers
- Optimal genset load constraint
- Define and change priority of connected power sources
- Controls functions, energy source or power source
- Grid-forming, grid-following, or droop mode (virtual synchronous generator)
- Uptime guaranteed through spinning reserve
- Maximised sustainable power penetration
- Load dependent genset start/stop by PMS or DO
- SOC dependent genset start/stop by DO - Rental
- Minimum genset load constraint
- Ideal for self-consumption applications
- Highly customisable with user-friendly M-Logic tool
- Control of breaker
- Record time commissioning with DEIF Emulation
- uses and verifies the functions of the real system for test, production and design - Suitable for power management solutions fitted with AGC-4, AGC 150 or AGC 200 genset controllers
- Suitable for stand-alone solutions using multi-instruments such as DEIF’s MIB or MIC
Automatic sustainable controller ASC-4 Solar
- Solar, storage, wind, Mains and genset integration in hybrid applications
- ASC-4 sustainable controllers and AGC-4 Mk II/AGC 150 let you control up to 32 gensets
- Simple graphical configuration
- Uptime guaranteed through spinning reserve
- Maximised sustainable power penetration
- Load dependent genset start/stop
- Minimum genset load constraint
- Ideal for self-consumption applications
- Highly customisable with user-friendly M-Logic tool
- Control of breaker
- Record time commissioning with DEIF Emulation
- uses and verifies the functions of the real system for test, production and design - Suitable for power management solutions fitted with AGC-4, AGC 150 or AGC 200 genset controllers
- Suitable for stand-alone solutions using multi-instruments such as DEIF’s MIB or MIC
Touch display units for asset and plant management TDU series
- Plug and play
- Build in AOP (additional operators panel) customizable buttons and status lamps
- Quick instrument selection directly from the screen
- Tier 4 Final support with automatic jump to dedicated Tier4 page
- Visual capability curve with actual working point of the genset
- Easy search functionality in several menus
- Live application supervision
- Possibility to merge alarm and event logs
- Service menu with estimated date for next service
- Live I/O overview
Advanced graphical interface AGI 400
- Wide screen format
- True glass front
- Capacitive touch screen
- Multi-touch and Gestures
- Robust aluminium housing
- SD card slot for easy storage and updating
- USB hosts for printers, accessories, data storage and updating
- Dimmable LED backlight
- Web server for remote access from i.e. mobile devices
- 3 Ethernet ports with integrated switch
- Serial communication (RS-232, RS-422 and RS-485)
- Wide range of support for industrial protocols
- OPC UA Server and Client
- JAVA scripting
- CODESYS V3 (optional)
- Powerful ARM Cortex-A9 processor
- Plug-in module for CANbus (CANopen/J1939)
- Wide operating temperature -20°C to +60°C
- Marine certifications
- Certified for hazardous environments
- Available in 7", 10", 15" and 21" sizes
Insight
- Visualised solution overview via customisable dashboard
- World map overview and GPS tracking
- Alarm notifications (email)
- Reports (PDF, CSV)
- Fleet management (unit grouping & scheduling)
- Flexible user/team management and user permissions
- Two factor verification for enhanced security
- Templates for selected DEIF products
Dashboards widgets
- Direct value visualisation
- Multiple options of guages
- World map overview
- Group data in lists
- Show latest notifications
- Trending with graphs
Responsive web service
- Designed for portable devices
- Works with most popular browsers
- Requires Insight subscription plan