AMC 300

General specifications

• Cold start-up/Operating temperature: -40 to 70 °C
• Storage temperature: -40 to 85 °C
• Climate: 55 °C 97 % RH condensing
• Altitude: < 4000 m
• Vibration : 2.1 g (3.2 to 50 Hz) 1.0g (13.2 to 100 Hz)
• Shock: 50 g, 11 ms, half sine
• Bump: 25 g, 6 ms, half sine
  
  

• New platform formfactor – height of just 122 mm; depth 114 mm
• Design lifetime of no less than 10 years at 40 ºC surrounding temperatures
• Backplane mounted rack ensuring stable inter-module communication during operation in the entire products lifetime
• Fully production tested control system units lowering in-sourcing costs for series production at customer
• Suitable for Stationary, mobile, wind turbine retrofit
• Increased mechanical robustness
• Increased electrical protection levels ; ESD up to 6kV, up to 4kV on power inputs and 2kV on all signal and communication power for fast transients protections
• Designed the input circuits with protections against failure connections
• Cold start up in very low-temperature without pre-heating
• Proven electronics design for demanding condensing climates
• Built-in standard EtherCAT as native communication protocol for use as distributed I/O
• High density IO modules
  • 24V DC Digital Inputs, Digital Outputs, Voltage / Current Analogue Inputs, PT-100 inputs
• Condition monitoring modules with High Frequency Analogue Inputs
• Support for most widely used fieldbusses : CAN/CANopen, PROFINET, RS-422/485, TCP/IP ( OPC UA, Modbus TCP etc. )

• Warranty: 2 years (not including wearable parts) with option to 5 totally years
  
  

System software, Operating System and Programming

• Operating system software with fail-safe update
  • DEIF In-house maintained OS
  • Real-time Patched Linux
  • Web based configuration
  • Simplified update procedures (no special tools, same for OS and firmware)
  • Secured Certificated based access by standard protocols
  • Customer manages all users (Operator, Service and Administrator), rights and credentials
  • Network configuration of the 2 independent network interfaces.
  • Network Time protocol support as Client
  • Fail-safe system software start up with two OS images (active and fault-back)
  • Fault-tolerant file system
• Web based configuration
• User management
• Programming with CODESYS V3.5 and C/C++
  • Regular updates to newest CODESYS V3.5 Service Packs
• Secure Web based visualization