MVR USW
You’re about to download MVR USW
You have chosen to download our software.
Within a few seconds, you will receive an email containing a download link.
Having trouble using the software? Please contact support@deif.com.
Best regards,
DEIF A/S
The software is subject to copyright DEIF A/S
By following the above mentioned link and downloading the file you automatically accept DEIF A/S copyright and license agreement (EULA). The license agreement can be found on www.deif.com/software
This software applies to the following DEIF products:
- MVR-200 series - Medium Voltage Relay
- MVR-F255 - Directional Feeder Protection
- MVR-F201 - Basic Feeder Protection
- MVR-F205 - Directional Feeder Protection
- MVR-F210 - Feeder Protection
- MVR-F215 - Directional Feeder Protection
- MVR-T215 - Transformer Protection
- MVR-T216 - Transformer Differential Protection
- MVR-T256 - Transformer Differential Protection
- MVR-T257 - Transformer Differential Protection
- MVR-V211 - Busbar Protection
- MVR-M210 - Motor Protection
- MVR-M215 - Motor Protection
- MVR-M255 - Motor Protection
- MVR-M257 - Motor Differential Protection
- MVR-G215 - Generator Protection
- MVR-G257 - Generator Differential Protection
You’re about to download 1.5.3-1
The main changes implemented since the last version are as follows:
New features
- T-card to rear panel view.
- Firmware version to MVR USW top left corner.
- Allow copying of device data from infobox.
- Lots of missing mapping to 61850.
- C++ redistributable to installer.
- Support for export logic view to PDF.
- Alarm colour selector in 250 mimics.
- Programmable stages mapping to IEC 61850.
Changes
- Changed default IP address to front port.
- Mimic colours now follow the colour theme.
- Updated Chinese translations.
- Event history: Adjusted the column order to timestamp first.
- Re-ordered GSE nodes to match GSE Control nodes.
Corrections
- Fixed check for updates functionality.
- Fixed type of BCR.actVal to match 61850 edition 2.
- Fixed issue with incorrect decimal places in some parameters for older firmwares.
- Fixed some descriptions in 61850 CID.
- Fixed RTD card size in rear panel view.
- Fixed issue with some menus not being loaded.
- Fixed SPA map saving. Does not overwrite existing file even when confirmed.
- Fixed communication map descriptions and added missing mappings.
Ver. | Date | Description |
---|---|---|
1.5.3-1 |
06/02/2025 |
New features
Changes
Corrections
|
1.5.1.38 |
08/05/2023 |
This software applies to the following DEIF products:
Patch notes:
|
1.4.1.423 |
16/08/2021 |
This software applies to the following DEIF products:
Patch notes:
|
1.4.1.148 |
27/01/2020 |
This software applies to the following DEIF products:
Patch notes:
|
1.4.1 |
25/01/2020 |
This software applies to the following DEIF products:
New features:
|
On this page, you can download software updates for your product(s) and help yourself to various utility tools and add-ons that will assist you in setting up, detecting faults and configuring your product(s).
Please be advised that not all of our products can be updated by the user. Nor do all of our products come with a utility tool. Consequently, the list on this page cannot be considered an overview of our product programme.
DEIF will register your download along with the used e-mail address for the purpose of sending out information on future updates, if requested.
DEIF cannot be made responsible for any consequences of failed product updates or use of utility tools. Nor can DEIF A/S be made responsible for consequences of changes in behaviour of products due to a software upgrade. It is always the responsibility of the user to ensure correct set-up and configuration before commissioning. Please study the version log of the software before updating the product.
Licence agreement for software downloaded from www.deif.com
Downloaded software remains the property of DEIF. The software may not be distributed for commercial purposes, changed or reused in full or in part or sold to any third parties.
The latest versions for full functionality
As always, we recommend that you install our offered improvements to fully utilise your DEIF product.
All improved software can be downloaded at your convenience at www.deif.com under “Software”.
Should you have any questions or experience problems finding the relevant software for your product, please feel free to call DEIF A/S at +45 96149614 or your relevant local DEIF office. Alternatively, we are always ready to assist you, if you send an e-mail to support@deif.com.