• DEIF AWC 500
• CoDeSys 3.x based PLC systems

Additional requirements:

• 3S CoDeSys 3.x
  If you do not already have CoDeSys 3.x, please contact your local 3S/CoDeSys representative. You can request a trial version at http://www.3s-software.com.

• DEIF AWC 400
• CoDeSys 2.3 based PLC systems
• Bachmann M-PLC 3.10
• Beckhoff TwinCAT 2.10

Additional requirements:

• 3S CoDeSys 2.3+
  If you do not already have CoDeSys 2.3, please contact your local 3S/CoDeSys representative. You can request a trial version at http://www.3s-software.com.
• Bachmann M-PLC 3.10+
  If you do not already have M-PLC 3.10, please contact your local Bachmann (http://www.bachmann.info) representative.
• Beckhoff TwinCAT 2.10+
  If you do not already have TwinCAT, please contact your local Beckhoff representative. You can request a trial version at http://www.beckhoff.com/twincat.

• Beckhoff TwinCAT 2.10+
  If you do not already have TwinCAT, please contact your local Beckhoff representative. You can request a trial version at http://www.beckhoff.com/twincat.

• Phoenix Contact PCWorX
  If you do not already have PCWorX, please contact your local Phoenix Contact (http://www.phoenixcontact.com) representative.

• KW-Software MULTIPROG 4.71+
  If you do not already have MULTIPROG, please contact your local KW-Software (http://www.kw-software.com) representative.

• SIEMENS SIMATIC STEP7 (with SCL support)
  If you do not already have SIMATIC STEP7, please contact your local Siemens representative.

• IecEdit
  If you do not already have IecEdit, please contact your local representative (http://www.keba.com).