Looking for either an efficient and reliable battery charger or the most cost-competitive power consumption monitor in the market? Look no further. Check out DEIF’s DCP2 batter charger or the MIB multi-instrument!
Upgrade your DC power supply
The light weight battery charger, DCP2, provides maximum efficiency and reliability. Based on well-proven switch-mode technology, the battery charger offers low weight, low ripple current and low heat emission.
The significantly reduced weight means that the DCP2 can be DIN-rail mounted providing a much easier installation and reduced wiring. The low ripple increases battery lifetime and makes the DCP2 a safe choice for combined charger and DC supply applications.
Maximum reliability is obtained by the de-rating circuit of the DCP2 preventing an entire shutdown of the device in case of extreme working conditions (eg. maximum nominal output current at high ambient temperatures). Instead of shutting down, the DCP will de-rate the output current to the highest obtainable level, and, at the same time, protect the device from overload and over-temperature damages. The efficient switch-mode technology reduces selfheating to a minimum.
Go to the DCP2 section for detailed information.
Cut your costs with the MIB multi-instrument
Monitor your power consumption using the most cost-competitive basic multi-instrument in the market for 3-phased solutions. The MIB is a simple and cost-effective way to replace numerous analogue meters in your switchboard.
The three members of DEIF’s MIB series measure voltage, current, active power, reactive power, power factor for three phases, and also the apparent power, harmonic content up to 15th, real and reactive energy, demand current and power, max/min values for real time readings.
 |
|
With their large screen, high clarity LCD and white backlight, they all offer excellent readability even in dimmed environments. All readings and setting parameters are accessible using the panel keys. The setting parameters are stored in EEPROM which maintains its content even in case of power loss. |
Unlike the basic MIB 7000, the new MIB 7000C can send all measurements in real time through RS485 Modbus communication. You can read the measurements out using DEIF’s free MIB 7000C utility software which is easy to setup. The MIB 7020 offers two digital outputs for energy pulse and/or alarm functionality.
Main applications
> Up to 690V measuring input Ph-Ph TRMS
> Suitable for all 1-phase and 3-phase network topologies
> Min./max. values for real time readings
> UL listed
> Accuracy, U, I and F class 0.5, other values class 1.0
Go to the MIB section for detailed information.
|
